Hulls are printed in Bambu Lab PLA Tough+ of the following colors:
| White | |
| Yellow | |
| Orange (Bambu's orange is almost red) | |
| Cyan | |
| Gray |
Internal parts on the Alioth and Proteus and external details on the Alioth can be printed in the same material and color as the hull or in any of the colors below in PLA:
| Jade White | |
| Beige | |
| Light Gray | |
| Yellow | |
| Sunflower Yellow | |
| Pumpkin Orange | |
| Orange | |
| Bright Green | |
| Bambu Green | |
| Mistletoe Green (not recommended - dark absorbs heat) | |
| Pink | |
| Hot Pink | |
| Magenta | |
| Red | |
| Maroon Red (not recommended - dark absorbs heat) | |
| Purple | |
| Indigo Purple (not recommended - dark absorbs heat) | |
| Turquise | |
| Cyan | |
| Cobalt Blue | |
| Blue (not recommended - dark absorbs heat) | |
| Brown (not recommended - dark absorbs heat) | |
| Cocoa Brown (not recommended - dark absorbs heat) | |
| Bronze (not recommended - dark absorbs heat) | |
| Gray | |
| Silver (not recommended - dark absorbs heat) | |
| Blue Gray (not recommended - dark absorbs heat) | |
| Dark Gray (not recommended - dark absorbs heat) | |
| Black (not recommended - dark absorbs heat) |