{"title":"Featured Products","description":null,"products":[{"product_id":"ballast-bulb-for-iom","title":"Ballast Bulb for IOM","description":"\u003cp\u003eCompetition ballast bulb designed to match the accompanying fin and balanced for the Alioth hull. Will also fit and perform exceptionally well on the Proteus. When matched to the accompanying fin, final weight will land very close to the target 2500g.\u003c\/p\u003e\n\u003cp\u003eProfile is optimised for performance, slightly flattened to bring down the center of gravity while remaining within keel regulation maximum draught. Flat tail design to minimize vortex and drag. \u003c\/p\u003e\n\u003cp\u003eBulb can be supplied in raw cast state or fully finished in glossy black and varnish. When supplied in cast state, includes the plastic fitting shaped for the Alioth keel. Fittings for other models can be constructed to adapt the bulb to fins of different profiles.\u003c\/p\u003e\n\u003cp\u003eBoth versions include the SAILSetc ballast seat INS-SEAT cast into the bulb for easy fixing. When paired with a fin with an M3 bolt, use SAILSetc ballast nut SP-BN-M3 (included with our fins) to fix the fin to the ballast bulb.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: lead and antimony alloy for added strength\u003c\/li\u003e\n\u003cli\u003eWeight: 2380g\u003c\/li\u003e\n\u003cli\u003eCenter of gravity: 16mm aft of keel leading edge. 4mm fore of screw hole\u003c\/li\u003e\n\u003cli\u003eFitting: Plastic fitting shaped for Alioth fin\u003c\/li\u003e\n\u003cli\u003eFixing: SAILSetc ballast seat INS-SEAT cast into base of bulb. Use INS-030 to attach a fin with a M3 bolt.\n\u003c\/li\u003e\n\u003cli\u003eLength: 350 mm\u003c\/li\u003e\n\u003cli\u003eProfile max width: 40 mm\u003c\/li\u003e\n\u003cli\u003eProfile max height: 35 mm\u003c\/li\u003e\n\u003cli\u003eSpace for plastic fitting: 83 mm x 9 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SailorMadeRC","offers":[{"title":"Painted Black","offer_id":57678091747663,"sku":"SM-BULB-IOMRCSLBLK","price":190.0,"currency_code":"EUR","in_stock":true},{"title":"Cast State","offer_id":57678091714895,"sku":"SM-BULB-IOMRCSLCAST","price":130.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-BULB.MAIN.jpg?v=1780263122"},{"product_id":"table-stand","title":"Table Stand","description":"\u003cp\u003eOur table stand can be used to display your hull on a shelf and as a support while working on your boat for building, trimming, installing electronics or polishing.\u003c\/p\u003e\n\u003cp\u003eA must have accessory for boat building. Our support has thick EVA foam padding to keep your hull safe while constructing and adjusting.\u003c\/p\u003e\n\u003cp\u003eThe IOM Wide model is best for construction work as it allows the hull to be easily flipped on its side or upside down for sanding and polishing.\u003c\/p\u003e\n\u003cp\u003eThe IOM Narrow model is best for storage and display as its narrow footprint will fit 15cm shelves.\u003c\/p\u003e\n\u003cp\u003eThe RG65 \/ DF 65 \/ Micro Magic model fits smaller boats for display or workshop activity.\u003c\/p\u003e\n\u003cp\u003eShipped unassembled for tighter packaging. Easy assembly.\u003c\/p\u003e\n\u003cp\u003eColors will vary according to stock availability and are not selectable. Gray is a common color for this item but not guaranteed. If color is critically important, send us a note and we can check possibilites.\u003c\/p\u003e\n\u003cp\u003eIncludes parts printed in PLA which has low heat resistance and may warp if left in direct sunlight or hot environments such as a hot car.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFits: IOM, RG65, DF 65, DF 95, Micro Magic and other similar models without the keel. Select appropriate model size.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConstruction: 3d Printed PLA, PVC pipe and adhesive EVA foam. PLA is a bioplastic with low melting point and becomes soft at 50°C.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIOM Wide:\n\u003cul\u003e\n\u003cli\u003eDimensions: 40 cm x 22.5 cm x 9.5 cm high\u003c\/li\u003e\n\u003cli\u003eWeight: 250 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIOM Narrow:\n\u003cul\u003e\n\u003cli\u003eDimensions: 40 cm x 19.7 cm x 7.4 cm high\u003c\/li\u003e\n\u003cli\u003eWeight: 215 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRG65 \/ DF65 \/ Micro Magic:\n\u003cul\u003e\n\u003cli\u003eDimensions: 14 cm x 30 cm x 6 cm high\u003c\/li\u003e\n\u003cli\u003eWeight: 135 g\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SailorMadeRC","offers":[{"title":"IOM Wide","offer_id":57678092042575,"sku":"SM-TABLE-IOMW","price":25.0,"currency_code":"EUR","in_stock":true},{"title":"IOM Narrow","offer_id":57678092075343,"sku":"SM-TABLE-IOMN","price":25.0,"currency_code":"EUR","in_stock":true},{"title":"RG65 \/ DF65 \/ Micro Magic","offer_id":57678092108111,"sku":"SM-TABLE-65","price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-TABLE.MAIN.jpg?v=1778626309"},{"product_id":"boom-drill-guide","title":"Boom Drill Guide","description":"\u003cp\u003eDrill guide blocks for precisely drilling boom holes for Z hooks. Available for in multiple measurement options.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable for 10 mm and 11 mm booms\u003c\/li\u003e\n\u003cli\u003eEach block has holes a different spacing on each side. Option one has holes spaced at 5 mm and 4 mm. Option two has holes spaced at 2.5 mm and 3 mm\u003c\/li\u003e\n\u003cli\u003eReference hole on the bottom for drilling vang hole\u003c\/li\u003e\n\u003cli\u003e1.5 mm reference holes for drilling\u003c\/li\u003e\n\u003cli\u003eNylon thumb screw for solid positioning. Can be screwed from two sides for greater flexibility\u003c\/li\u003e\n\u003cli\u003eReference notch for easy alignment marking\u003c\/li\u003e\n\u003cli\u003eMeasurement specific colours for easy identification in the workshop.\u003c\/li\u003e\n\u003cli\u003ePrinted in PLA which is a bioplastic but has low heat resistance. May warp if left in direct sunlight or hot environments such as a hot car.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eUsage instructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAlign the block to the boom using the reference notch. This is also useful to mark the boom for installation of other components.\u003c\/li\u003e\n\u003cli\u003ePosition the boom block where desired to drill holes for a Z hook.\u003c\/li\u003e\n\u003cli\u003eDo not over tighten the nylon lock as it may deform the mast.\u003c\/li\u003e\n\u003cli\u003eOptionally two drill blocks, or a mast drill block may be used to allow movement of the boom drill block while maintaining reference. With one block set as reference, lay the boom and block on a flat surface and align the second block to same flat surface. With one block tightened, the other may be moved without losing alignment reference.\u003c\/li\u003e\n\u003cli\u003eDrill carefully with a 1.5mm drill. Be careful to keep the drill aligned not to widen the reference holes. If the tool is used carefully it may be used to drill multiple booms before needing replacement.\u003c\/li\u003e\n\u003cli\u003eIf a larger hole is needed, drill a 1.5mm hole, remove the drill block and re-drill with a wider drill bit.\u003c\/li\u003e\n\u003cli\u003eFor positioning the vang hole consider the reference hole is 5 mm from the edge of the block.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 3d printed in PLA which is a bioplastic with low melting point and becomes soft at 50°C.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixing screw: M6 nylon thumb screw\u003c\/li\u003e\n\u003cli\u003eDimensions: 34 mm tall, 24 mm wide, 50 mm long\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SailorMadeRC","offers":[{"title":"11 mm boom \/ 4 and 5 mm spacing","offer_id":58027281187151,"sku":"SM-DRILLBOOM-1145","price":5.0,"currency_code":"EUR","in_stock":true},{"title":"11 mm boom \/ 2.5 and 3 mm spacing","offer_id":58027281154383,"sku":"SM-DRILLBOOM-1123","price":5.0,"currency_code":"EUR","in_stock":true},{"title":"10 mm boom \/ 4 and 5 mm spacing","offer_id":58027281121615,"sku":"SM-DRILLBOOM-1045","price":5.0,"currency_code":"EUR","in_stock":true},{"title":"10 mm boom \/ 2.5 and 3 mm spacing","offer_id":58027281088847,"sku":"SM-DRILLBOOM-1023","price":5.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-DRILLBOOM.MAIN.jpg?v=1778626249"},{"product_id":"class-insignia","title":"Class Insignia","description":"\u003cp\u003eTemplates for sail marking class insignias using permanent ink pens. Adheres to class rules. Available for IOM, RG 65, Marblehead, 10 Rater, Six Metre, A Class, Mini 40, Mini 20, Footy, DF 65 and DF 95.\u003c\/p\u003e\n\u003cp\u003eOur templates are designed to produce end results that match class rules. Templates are reversible to mark both sides of the sails.\u003c\/p\u003e\n\u003cp\u003eTemplates are 2mm thick and have beveled edges to avoid ink bleeding.\u003c\/p\u003e\n\u003cp\u003eWe recommend marking sails with ink instead of adhesive Dacron as ink will not impact shape or movement of sails. Ink is also easy to remove and retouch as sails are passed on to other sailors. Never use vinyl or other adhesives to mark sails as these may shrink and deform sails.\u003c\/p\u003e\n\u003cp\u003eUse alcohol based permanent ink pens. We recommend Pentel N50 permanent markers. To remove ink based sail marking use acetone or isopropyl alcohol.\u003c\/p\u003e\n\u003cp\u003eTempaltes are printed in PLA. Colors will vary according to stock availability and are not selectable for our temoplates. PLA has low heat resistance and may warp if left in direct sunlight or hot environments such as a hot car.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eUsage instructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTape the templates to the sails with masking tape for a firm position\u003c\/li\u003e\n\u003cli\u003eTrace the templates with an alcohol based felt tip permanent marker. Pentel N50 recommended\u003c\/li\u003e\n\u003cli\u003eFill in traced area before removing the templates. Avoid excessive ink coverage\u003c\/li\u003e\n\u003cli\u003eRemove templates after ink quickly dries\u003c\/li\u003e\n\u003cli\u003eCarefully complete design where supports existed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 3d printed in PLA which is a bioplastic with low melting point and becomes soft at 50°C.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eColor: Random colors according to stock availability. Not selectable.\u003c\/li\u003e\n\u003cli\u003eThickness: 2 mm\u003c\/li\u003e\n\u003cli\u003eBeveled edges to avoid ink bleeding\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SailorMadeRC","offers":[{"title":"IOM","offer_id":57678092468559,"sku":"SM-INSIGNIA-IOM","price":2.0,"currency_code":"EUR","in_stock":true},{"title":"RG65","offer_id":57678092501327,"sku":"SM-INSIGNIA-RG65","price":2.0,"currency_code":"EUR","in_stock":true},{"title":"Marblehead","offer_id":57678092534095,"sku":"SM-INSIGNIA-M","price":2.0,"currency_code":"EUR","in_stock":true},{"title":"10 Rater","offer_id":57678092566863,"sku":"SM-INSIGNIA-10R","price":2.0,"currency_code":"EUR","in_stock":true},{"title":"6 Meter","offer_id":57678092599631,"sku":"SM-INSIGNIA-6M","price":2.0,"currency_code":"EUR","in_stock":true},{"title":"A Class","offer_id":57678092632399,"sku":"SM-INSIGNIA-A","price":2.0,"currency_code":"EUR","in_stock":true},{"title":"Mini 40","offer_id":57678092665167,"sku":"SM-INSIGNIA-MINI40","price":2.0,"currency_code":"EUR","in_stock":true},{"title":"Mini 20","offer_id":57678092697935,"sku":"SM-INSIGNIA-MINI20","price":2.0,"currency_code":"EUR","in_stock":true},{"title":"Footy","offer_id":57678092730703,"sku":"SM-INSIGNIA-FOOTY","price":2.0,"currency_code":"EUR","in_stock":true},{"title":"DF65","offer_id":57678092763471,"sku":"SM-INSIGNIA-DF65","price":2.0,"currency_code":"EUR","in_stock":true},{"title":"DF95","offer_id":57678092796239,"sku":"SM-INSIGNIA-DF95","price":2.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-INSIGNIA.MAIN.jpg?v=1778626252"},{"product_id":"country-lettering-60mm","title":"Country Lettering 60 mm","description":"\u003cp\u003eTemplates for sail marking country letters using permanent ink pens. Adheres to \u003ca href=\"https:\/\/radiosailing.org\/download\/irsa-supplementary-class-rules-2020-4\/\" rel=\"noopener\" target=\"_blank\"\u003eIRSA Supplementary Class Rules\u003c\/a\u003e and \u003ca href=\"https:\/\/www.mya-uk.org.uk\/kb\/mya-supplementary-class-rules-sail-id-marks\/\" rel=\"noopener\" target=\"_blank\"\u003eMYA Supplementary Class Rules\u003c\/a\u003e covering IOM, 10 Rater, A Class, Six Metre, Marblehead, Mini 40 and other classes.\u003c\/p\u003e\n\u003cp\u003eOur templates are custom built using Arial font to result in clean visible letters that adhere to class regulations. Resulting letters are 61 mm tall and spaced 15-23 mm depending on letter pair.\u003c\/p\u003e\n\u003cp\u003eTemplates are 2mm thick and have beveled edges to avoid ink bleeding.\u003c\/p\u003e\n\u003cp\u003eWe recommend marking sails with ink instead of adhesive Dacron as ink will not impact shape or movement of sails. Ink is also easy to remove and retouch as sails are passed on to other sailors. Never use vinyl or other adhesives to mark sails as these may shrink and deform sails.\u003c\/p\u003e\n\u003cp\u003eUse alcohol based permanent ink pens. We recommend Pentel N50 permanent markers. To remove ink based sail marking use acetone or isopropyl alcohol.\u003c\/p\u003e\n\u003cp\u003eTempaltes are printed in PLA. Colors will vary according to stock availability and are not selectable for our temoplates. PLA has low heat resistance and may warp if left in direct sunlight or hot environments such as a hot car.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eUsage instructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTape the templates to the sails with masking tape for a firm position\u003c\/li\u003e\n\u003cli\u003eTrace the templates with an alcohol based felt tip permanent marker. Pentel N50 recommended\u003c\/li\u003e\n\u003cli\u003eFill in traced area before removing the templates. Avoid excessive ink coverage\u003c\/li\u003e\n\u003cli\u003eRemove templates after ink quickly dries\u003c\/li\u003e\n\u003cli\u003eCarefully complete design where supports existed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 3d printed in PLA which is a bioplastic with low melting point and becomes soft at 50°C.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eColor: Random colors according to stock availability. Not selectable.\u003c\/li\u003e\n\u003cli\u003eResulting letters: 61 mm tall\u003c\/li\u003e\n\u003cli\u003eFont: Arial\u003c\/li\u003e\n\u003cli\u003eLetter spacing: 15-23 mm depending on letter combination\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThickness: 2 mm\u003c\/li\u003e\n\u003cli\u003eBeveled edges to avoid ink bleeding\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SailorMadeRC","offers":[{"title":"(select country)","offer_id":57709723550031,"sku":"SM-LETTER60-SELECT","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Argentina (ARG)","offer_id":57678092829007,"sku":"SM-LETTER60-ARG","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Australia (AUS)","offer_id":57678092861775,"sku":"SM-LETTER60-AUS","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Austria (AUT)","offer_id":57678092894543,"sku":"SM-LETTER60-AUT","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Bahamas (BAH)","offer_id":57678092927311,"sku":"SM-LETTER60-BAH","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Barbados (BAR)","offer_id":57678092960079,"sku":"SM-LETTER60-BAR","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Belgium (BEL)","offer_id":57678092992847,"sku":"SM-LETTER60-BEL","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Bermuda (BER)","offer_id":57678093025615,"sku":"SM-LETTER60-BER","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Brazil (BRA)","offer_id":57678093058383,"sku":"SM-LETTER60-BRA","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Bulgaria (BUL)","offer_id":57678093091151,"sku":"SM-LETTER60-BUL","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Canada (CAN)","offer_id":57678093123919,"sku":"SM-LETTER60-CAN","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Chile (CHI)","offer_id":57678093156687,"sku":"SM-LETTER60-CHI","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"China (CHN)","offer_id":57678093189455,"sku":"SM-LETTER60-CHN","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Croatia (CRO)","offer_id":57678093222223,"sku":"SM-LETTER60-CRO","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Cyprus (CYP)","offer_id":57678093254991,"sku":"SM-LETTER60-CYP","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Czech Republic (CZE)","offer_id":57678093287759,"sku":"SM-LETTER60-CZE","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Denmark (DEN)","offer_id":57678093320527,"sku":"SM-LETTER60-DEN","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Spain (ESP)","offer_id":57678093353295,"sku":"SM-LETTER60-ESP","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Estonia (EST)","offer_id":57678093386063,"sku":"SM-LETTER60-EST","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Finland (FIN)","offer_id":57678093418831,"sku":"SM-LETTER60-FIN","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"France (FRA)","offer_id":57678093451599,"sku":"SM-LETTER60-FRA","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Great Britain (GBR)","offer_id":57678093484367,"sku":"SM-LETTER60-GBR","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Germany (GER)","offer_id":57678093517135,"sku":"SM-LETTER60-GER","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Greece (GRE)","offer_id":57678093549903,"sku":"SM-LETTER60-GRE","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Hungary (HUN)","offer_id":57678093582671,"sku":"SM-LETTER60-HUN","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Ireland (IRL)","offer_id":57678093615439,"sku":"SM-LETTER60-IRL","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Iceland (ISL)","offer_id":57678093648207,"sku":"SM-LETTER60-ISL","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Israel (ISR)","offer_id":57678093680975,"sku":"SM-LETTER60-ISR","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Italy (ITA)","offer_id":57678093713743,"sku":"SM-LETTER60-ITA","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Japan (JPN)","offer_id":57678093746511,"sku":"SM-LETTER60-JPN","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Korea, Republic of (KOR)","offer_id":57678093779279,"sku":"SM-LETTER60-KOR","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Luxembourg (LUX)","offer_id":57678093812047,"sku":"SM-LETTER60-LUX","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Malaysia (MAS)","offer_id":57678093844815,"sku":"SM-LETTER60-MAS","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Mexico (MEX)","offer_id":57678093877583,"sku":"SM-LETTER60-MEX","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Malta (MLT)","offer_id":57678093910351,"sku":"SM-LETTER60-MLT","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Netherlands (NED)","offer_id":57678093943119,"sku":"SM-LETTER60-NED","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Norway (NOR)","offer_id":57678093975887,"sku":"SM-LETTER60-NOR","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"New Zealand (NZL)","offer_id":57678094008655,"sku":"SM-LETTER60-NZL","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Panama (PAN)","offer_id":57678094041423,"sku":"SM-LETTER60-PAN","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Poland (POL)","offer_id":57678094074191,"sku":"SM-LETTER60-POL","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Portugal (POR)","offer_id":57678094106959,"sku":"SM-LETTER60-POR","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Puerto Rico (PUR)","offer_id":57678094139727,"sku":"SM-LETTER60-PUR","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Romania (ROU)","offer_id":57678094172495,"sku":"SM-LETTER60-ROU","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"South Africa (RSA)","offer_id":57678094205263,"sku":"SM-LETTER60-RSA","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Singapore (SGP)","offer_id":57678094238031,"sku":"SM-LETTER60-SGP","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Slovenia (SLO)","offer_id":57678094270799,"sku":"SM-LETTER60-SLO","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Serbia (SRB)","offer_id":57678094303567,"sku":"SM-LETTER60-SRB","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Switzerland (SUI)","offer_id":57678094336335,"sku":"SM-LETTER60-SUI","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Slovak Republic (SVK)","offer_id":57678094369103,"sku":"SM-LETTER60-SVK","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Sweden (SWE)","offer_id":57678094401871,"sku":"SM-LETTER60-SWE","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Thailand (THA)","offer_id":57678094434639,"sku":"SM-LETTER60-THA","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Turkey (TUR)","offer_id":57678094467407,"sku":"SM-LETTER60-TUR","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Ukraine (UKR)","offer_id":57678094500175,"sku":"SM-LETTER60-UKR","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"United States (USA)","offer_id":57678094532943,"sku":"SM-LETTER60-USA","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-LETTER60.PT07.jpg?v=1778626253"},{"product_id":"sail-numbers-100mm","title":"Sail Numbers 100 mm","description":"\u003cp\u003eTemplates for sail marking numbers using permanent ink pens. Adheres to \u003ca rel=\"noopener\" href=\"https:\/\/radiosailing.org\/download\/irsa-supplementary-class-rules-2020-4\/\" target=\"_blank\"\u003eIRSA Supplementary Class Rules\u003c\/a\u003e and \u003ca rel=\"noopener\" href=\"https:\/\/www.mya-uk.org.uk\/kb\/mya-supplementary-class-rules-sail-id-marks\/\" target=\"_blank\"\u003eMYA Supplementary Class Rules\u003c\/a\u003e covering IOM, 10 Rater, A Class, Six Metre, Marblehead, Mini 40 and other classes. DF 95 sails may also use these templates but spacing between digits must be adjusted to the narrower spacing rules.\u003c\/p\u003e\n\u003cp\u003eOur templates are custom built using Arial font to result in clean visible numbers that adhere to class regulations. Resulting numbers are 101 mm tall and spaced 20-30 mm depending on number pair.\u003c\/p\u003e\n\u003cp\u003eTwo options for the 1 digit are available to accommodate for personal preference. The vertical bar version is narrow and particularly useful to be added as a differentiator in case of number clashes at a regatta and should be in every sailor's kit. The full set includes both versions of the 1 digit.\u003c\/p\u003e\n\u003cp\u003eNotches on the templates allow for precise number alignment and correct spacing according to class rules. Templates are 2mm thick and have beveled edges to avoid ink bleeding.\u003c\/p\u003e\n\u003cp\u003eWe recommend marking sails with ink instead of adhesive Dacron as ink will not impact shape or movement of sails. Ink is also easy to remove and retouch as sails are passed on to other sailors. Never use vinyl or other adhesives to mark sails as these may shrink and deform sails.\u003c\/p\u003e\n\u003cp\u003eUse alcohol based permanent ink pens. We recommend Pentel N50 permanent markers. To remove ink based sail marking use acetone or isopropyl alcohol.\u003c\/p\u003e\n\u003cp\u003eTempaltes are printed in PLA. Colors will vary according to stock availability and are not selectable for our temoplates. PLA has low heat resistance and may warp if left in direct sunlight or hot environments such as a hot car.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eUsage instructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTape the templates to the sails with masking tape for a firm position\u003c\/li\u003e\n\u003cli\u003eTrace the templates with an alcohol based felt tip permanent marker. Pentel N50 recommended\u003c\/li\u003e\n\u003cli\u003eFill in traced area before removing the templates. Avoid excessive ink coverage\u003c\/li\u003e\n\u003cli\u003eRemove templates after ink quickly dries\u003c\/li\u003e\n\u003cli\u003eCarefully complete design where supports existed\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 3d printed in PLA which is a bioplastic with low melting point and becomes soft at 50°C.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eColor: Random colors according to stock availability. Not selectable.\u003c\/li\u003e\n\u003cli\u003eResulting numbers: 101 mm tall\u003c\/li\u003e\n\u003cli\u003eFont: Arial\u003c\/li\u003e\n\u003cli\u003eNumber spacing: 20-30 mm depending on digit combination\u003c\/li\u003e\n\u003cli\u003eNotches provide precise fitting for aligned numbers and correct spacing\u003c\/li\u003e\n\u003cli\u003eThickness: 2 mm\u003c\/li\u003e\n\u003cli\u003eBeveled edges to avoid ink bleeding\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SailorMadeRC","offers":[{"title":"(select)","offer_id":57709731905871,"sku":"SM-NUM100-SELECT","price":3.5,"currency_code":"EUR","in_stock":true},{"title":"Set (11 digits)","offer_id":57678096302415,"sku":"SM-NUM100-SET","price":30.0,"currency_code":"EUR","in_stock":true},{"title":"1 (vertical bar)","offer_id":57678096335183,"sku":"SM-NUM100-1BAR","price":3.5,"currency_code":"EUR","in_stock":true},{"title":"1","offer_id":57678096367951,"sku":"SM-NUM100-1","price":3.5,"currency_code":"EUR","in_stock":true},{"title":"2","offer_id":57678096400719,"sku":"SM-NUM100-2","price":3.5,"currency_code":"EUR","in_stock":true},{"title":"3","offer_id":57678096433487,"sku":"SM-NUM100-3","price":3.5,"currency_code":"EUR","in_stock":true},{"title":"4","offer_id":57678096466255,"sku":"SM-NUM100-4","price":3.5,"currency_code":"EUR","in_stock":true},{"title":"5","offer_id":57678096499023,"sku":"SM-NUM100-5","price":3.5,"currency_code":"EUR","in_stock":true},{"title":"6","offer_id":57678096531791,"sku":"SM-NUM100-6","price":3.5,"currency_code":"EUR","in_stock":true},{"title":"7","offer_id":57678096564559,"sku":"SM-NUM100-7","price":3.5,"currency_code":"EUR","in_stock":true},{"title":"8","offer_id":57678096597327,"sku":"SM-NUM100-8","price":3.5,"currency_code":"EUR","in_stock":true},{"title":"9","offer_id":57678096630095,"sku":"SM-NUM100-9","price":3.5,"currency_code":"EUR","in_stock":true},{"title":"0","offer_id":57678096662863,"sku":"SM-NUM100-0","price":3.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-NUM100.MAIN.jpg?v=1778626310"},{"product_id":"rudder-for-iom","title":"Rudder for IOM","description":"\u003cp\u003eHigh quality competition rudder for IOM boats.\u003c\/p\u003e\n\u003cp\u003eDesigned for the Alioth by Juan Marcos Egea using computational fluid dynamics simulations to optimize the hydrodynamic profile. This rudder also fits and performs well on the Proteus and other modern IOM designs.\u003c\/p\u003e\n\u003cp\u003eThe rudder is produced in high quality carbon fibre and epoxy by Juan Marco's expert team and finished to perfection. A well balanced rudder that will offer precise control in any condition.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eShaft: Stainless steel 4mm diameter\u003c\/li\u003e\n\u003cli\u003eConstruction: Carbon fibre laminated epoxy over foam core\u003c\/li\u003e\n\u003cli\u003eProfile thickness (at maximum point): 5.4 mm\u003c\/li\u003e\n\u003cli\u003eBlade width (chord): 73 mm\u003c\/li\u003e\n\u003cli\u003eBlade length: 201 mm\u003c\/li\u003e\n\u003cli\u003eShaft length: 69 mm\u003c\/li\u003e\n\u003cli\u003eOverall length: 261 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 35 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SailorMadeRC","offers":[{"title":"Default Title","offer_id":57678269514063,"sku":"SM-RUD-IOMRCSL","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-RUD-IOMRCSL.MAIN.jpg?v=1780263077"},{"product_id":"keel-fin-for-iom","title":"Keel Fin for IOM","description":"\u003cp\u003eHigh quality competition fin for IOM boats.\u003c\/p\u003e\n\u003cp\u003eDesigned for the Alioth by Juan Marcos Egea using computational fluid dynamics simulations to optimize the hydrodynamic profile. Performs equally well when fitted on a Proteus hull with the accompanying fin box insert.\u003c\/p\u003e\n\u003cp\u003eThe fin is produced in high quality carbon fibre and epoxy by Juan Marco's expert team and finished to perfection. A well balanced and rigid fin, with minimal flex and torsion.\u003c\/p\u003e\n\u003cp\u003eSupplied with a fin box insert to match the Alioth v3 and v4 hulls or the Proteus 1.2 and 1.6 hulls. Ideally, the fin box insert should be glued to the hull before final sanding and finishing. An unglued insert may transfer excessive load to the fin box, leading to hull failure. Fin box inserts for other IOM models may also be developed to use this fin with other boats.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction: Carbon fibre laminated epoxy over foam core\u003c\/li\u003e\n\u003cli\u003eProfile thickness at top of fin (at maximum point): 6.9 mm\u003c\/li\u003e\n\u003cli\u003eProfile thickness at bottom of fin (at maximum point): 5.0 mm\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eBlade width (chord) at top of fin: 92 mm\u003c\/li\u003e\n\u003cli\u003eBlade width (chord) at bottom of fin: 67 mm\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eBlade length( head excluded): 340 mm\u003c\/li\u003e\n\u003cli\u003eFixing bolts: M3 stainless steel, embedded into epoxy on fin base and head\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixing: includes M3 nut and nylon washers on head and SAILSetc ballast nut \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eSP-BN-M3\u003c\/span\u003e to attach fin to bulb\u003c\/li\u003e\n\u003cli\u003eWeight: 115 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SailorMadeRC","offers":[{"title":"For Alioth v3 \u0026 v4","offer_id":57920746684751,"sku":"SM-KEEL-IOMRCSL-ALI","price":185.0,"currency_code":"EUR","in_stock":true},{"title":"For Proteus 1.2 \u0026 1.6","offer_id":57920746717519,"sku":"SM-KEEL-IOMRCSL-PROT","price":185.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-KEEL-IOMRCSL.MAIN.jpg?v=1780263101"},{"product_id":"mast-drill-guide","title":"Mast Drill Guides (pair)","description":"\u003cp\u003eDrill guide blocks for precisely drilling masts and aligning the gooseneck from various manufacturers. One pair in each set.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAccommodates 11 mm masts\u003c\/li\u003e\n\u003cli\u003eSupplied in pairs to maintain alignment reference while moving one of the blocks\u003c\/li\u003e\n\u003cli\u003eNylon thumb screw for solid positioning. Can be screwed from two sides for greater flexibility\u003c\/li\u003e\n\u003cli\u003eDrill guide holes on four faces at perfectly square angles\u003c\/li\u003e\n\u003cli\u003e1.5 mm holes for drilling\u003c\/li\u003e\n\u003cli\u003eReference notches for marking and aligning holes to measurement references\u003c\/li\u003e\n\u003cli\u003eGooseneck alignment guides fit 2, 3, 4 and 5.5 mm pins allowing for precise alignment of goosenecks from different suppliers. Tested with SAILSetc and PG Modelisme models.\u003c\/li\u003e\n\u003cli\u003eOrange colour for easy visibility in the workshop.\u003c\/li\u003e\n\u003cli\u003ePrinted in PLA which is a bioplastic but has low heat resistance. May warp if left in direct sunlight or hot environments such as a hot car.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eUsage instructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIf working on a pre-bent mast, align one block to the fore or aft bend marking and lock down.\u003c\/li\u003e\n\u003cli\u003eDo not over tighten the nylon lock as it may deform the mast.\u003c\/li\u003e\n\u003cli\u003eIf working with an unbent mast that will be bent, fix one block to the base of the mast and use it as reference while bending the mast. This way the block will be perfectly aligned to the mast bend direction.\u003c\/li\u003e\n\u003cli\u003eWith one block set as reference, lay the mast and block on a flat surface and align the second block to same flat surface. With one block tightened, the other may be moved without losing alignment reference.\u003c\/li\u003e\n\u003cli\u003eUse the side notches to measure the positions for forestay and shrouds. Alternatively build a reference ruler with markings for bands and holes. Use the side notches to align the drilling holes to the markings on the ruler.\u003c\/li\u003e\n\u003cli\u003eDrill carefully with a 1.5mm drill. Be careful to keep the drill aligned not to widen the reference holes. If the tool is used carefully it may be used to drill multiple masts before needing replacement.\u003c\/li\u003e\n\u003cli\u003eIf a larger hole is needed, drill a 1.5mm hole, remove the drill block and re-drill with a wider drill bit. Alternatively carefully drill the block with a wider bit to widen the reference hole.\u003c\/li\u003e\n\u003cli\u003eTo align a gooseneck:\n\u003cul\u003e\n\u003cli\u003eCheck which ends of the gooseneck fit into the reference guides. Some models require removing the boom end fitting. Some models will align using the screw that holds the boom end fitting.\u003c\/li\u003e\n\u003cli\u003eThe pin or screw on the gooseneck should fit snugly into the alignment groove. Add tape to both sides of the groove if a tighter fit is desired.\u003c\/li\u003e\n\u003cli\u003eCheck if your gooseneck can be supported by two blocks, from either side, for greater support\u003c\/li\u003e\n\u003cli\u003eWith one block still serving as an alignment reference on the mast, position the second block so it holds the gooseneck in place and aligned to the mast bend and drilled holes. Tighten the block\u003c\/li\u003e\n\u003cli\u003eIf your gooseneck can be supported by a second block on the other end, move a free block to this position and tighten. The gooseneck should be firmly in place for drilling.\u003c\/li\u003e\n\u003cli\u003eOptionally, for added stability while drilling, place a few dots of cyanoacrylate glue to hold the gooseneck in place, or temporarily tie it down with zip ties.\u003c\/li\u003e\n\u003cli\u003eCarefully drill the gooseneck and mast as instructed by the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 3d printed in PLA which is a bioplastic with low melting point and becomes soft at 50°C.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixing screw: M6 nylon thumb screw\u003c\/li\u003e\n\u003cli\u003eDimensions: 34 mm cube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SailorMadeRC","offers":[{"title":"Default Title","offer_id":57678270824783,"sku":"SM-DRILLMAST-11","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-DRILLMAST-11.MAIN.jpg?v=1778626251"},{"product_id":"weighing-support","title":"Weighing Support","description":"\u003cp\u003eAll racing RC sailboats must conform to strict weight limitations. Our support holds your boat in place for precise weighing, either at home, at the workshop, or used by judges to certify boats before regattas.\u003c\/p\u003e\n\u003cp\u003eJust slip the bulb and keel into the support and it will balance perfectly. The low center of gravity of the boats, due the the ballast, will keep even a fully rigged IOM stable for weighing. EVA foam padding protects the bulb and fin from any scratches.\u003c\/p\u003e\n\u003cp\u003eThe support can also be used as a stand to display your hull on a shelf.\u003c\/p\u003e\n\u003cp\u003eColors will vary according to stock availability and are not selectable. Gray is a common color for this item but not guaranteed. If color is critically important, send us a note and we can check possibilites.\u003c\/p\u003e\n\u003cp\u003eIncludes parts printed in PLA which has low heat resistance and may warp if left in direct sunlight or hot environments such as a hot car.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFits: IOM, RG65, DF 65, DF 95, Micro Magic and other similar models\u003c\/li\u003e\n\u003cli\u003eMaximum bulb width: 48mm\u003c\/li\u003e\n\u003cli\u003eConstruction: 3d Printed PLA, PVC pipe and adhesive EVA foam. PLA is a bioplastic with low melting point and becomes soft at 50°C.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLength: 15 cm\u003c\/li\u003e\n\u003cli\u003eWidth: 8 cm\u003c\/li\u003e\n\u003cli\u003eHeight: 22 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 190 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SailorMadeRC","offers":[{"title":"Default Title","offer_id":57678270857551,"sku":"SM-WEIGH-U","price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-WEIGH-U.MAIN.jpg?v=1778626309"},{"product_id":"iom-proteus-v1-2","title":"IOM - Proteus EVO 1.2","description":"\u003cp\u003eBuild kits for a Proteus EVO 1.2 AeroDeck IOM hull. Available in two options:\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFull Hull Build Kit\u003c\/strong\u003e includes all of the parts and adhesives necessary to build a complete hull, except the bow bumper which should be selected and ordered separately.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eHull Parts Only\u003c\/strong\u003e version includes all of the printed parts, but will require you to source all of the fittings and adhesives to complete the hull.\u003c\/p\u003e\n\u003cp\u003eFull build instructions will shortly be available.\u003c\/p\u003e\n\u003cp\u003eSelect the desired hull color from the listed options. Internal components and details can be printed in PLA of any color. Use the text box to customize as desired. Available colors can be viewed \u003ca href=\"\/blogs\/reference\/colors\" title=\"Color References\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e. If no color is specified these parts will be printed in the same color as the hull.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eAbout the Proteus\u003c\/h4\u003e\n\u003cp\u003eThe Proteus is a recent development designed by Craig Richards in the UK. Launched in September 2025, the boat is rapidly evolving and is already in its third public version. The two latest versions are available as kits. While currently having a smaller fleet than the Alioth, the Proteus has demonstrated its modern lines are very competitive, both in national and international events.\u003c\/p\u003e\n\u003cp\u003eThe EVO 1.2 is an evolution of the original hull. With very slight changes to the hull design from the original boat, the EVO 1.2 brought the innovative AeroDeck which completely hides the hatch for a very clean deck. After sailing the UK nationals and placing 6th with version 1.2, Craig wanted to improve the hull, particularly for the conditions in Datchet with stronger winds and choppy waves.\u003c\/p\u003e\n\u003cp\u003eEVO 1.6 is the latest hull design, with which Craig raced the world championship in Datchet and placed 10th among 84 of the best skippers in the world. It has a standard pot lid hatch but uses a magnetic jib attachment and a new path for sailwinch lines that leads to a clean deck. In Craig's own words:\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\"The Proteus project was to try and get a 3D printed boat good enough to have a chance at the worlds. As I sailed each regatta I would come home with ideas to improve the existing boat ... so the boat evolved, hence the EVO. All the releases were good. 1.2 is very fast in most of the smaller venues we sail in, but where there is a longer fetch and we get short steep waves it can be hard to hold onto the Venti and Britpop. 1.3 To 1.5 were not improvements and were not released. 1.6 seems good all round and I think is faster downwind in waves. All the boats are so close in performance I dont think we are going to see a boat that has a hull that is noticeably faster. So, 1.6 may be faster across a broad range of Datchet conditions, but on flatter smaller waters 1.2 will more than hold its own.\"\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe Proteus concept, in line with the Alioth, seeks to make competitive IOM boats accessible to the home builder at a fraction of the cost (and time) of fibreglass yachts. Using standard 3D printing techniques (instead of the advanced vase mode used by the Alioth) allows the Proteus to incorporate much of the internal components in the hull printing process. This leads to an easier build, with fewer components and simpler steps.\u003c\/p\u003e\n\u003cp\u003eOur complete build kits and step-by-step guides make building a competitive boat achievable even to the novice builder. Total build time should be around one week with a few hours per night, or two full weekends. Check out our detailed build guide for more details. You will also find valuable information and support in the strong Facebook community of Proteus builders and owners.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eComponents of the Full Hull Build Kit - Proteus EVO 1.2\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHull\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eHull printed in 6 sections in PLA Tough+ in the colour of your choice\u003c\/li\u003e\n\u003cli\u003eUser license for one Proteus boat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eExternal printed components in PLA Tough+ in the same color of the hull\n\u003cul\u003e\n\u003cli\u003eAeroDeck hatch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInternal printed components in PLA in the colour of your choice\n\u003cul\u003e\n\u003cli\u003ePot lid\u003c\/li\u003e\n\u003cli\u003ePot trunk rim\u003c\/li\u003e\n\u003cli\u003eServo tray sailwinch and rudder servo\u003c\/li\u003e\n\u003cli\u003eBattery housing\u003c\/li\u003e\n\u003cli\u003eMast ram\u003c\/li\u003e\n\u003cli\u003eFin box insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFittings\n\u003cul\u003e\n\u003cli\u003eRudder shaft 4 mm diameter\u003c\/li\u003e\n\u003cli\u003eDeck block - ball raced\u003c\/li\u003e\n\u003cli\u003eDeck block screws M2 x 16mm\u003c\/li\u003e\n\u003cli\u003eWheel nut M4\u003c\/li\u003e\n\u003cli\u003eCountersunk screw M4 x 40mm\u003c\/li\u003e\n\u003cli\u003e1.2mm stainless steel wire for sheet loops\u003c\/li\u003e\n\u003cli\u003e11 Eyebolts M3.5 x 25mm (040-025)\u003c\/li\u003e\n\u003cli\u003e2 M3.5 nuts\u003c\/li\u003e\n\u003cli\u003ePTFE tube 10 cm\u003c\/li\u003e\n\u003cli\u003e4 magnets 6 mm diameter x 4 mm\u003c\/li\u003e\n\u003cli\u003eRudder arm\u003c\/li\u003e\n\u003cli\u003eRudder link M3 x 300mm\u003c\/li\u003e\n\u003cli\u003e2 Rudder link ball joint terminals M3\u003c\/li\u003e\n\u003cli\u003eMast heel fitting\u003c\/li\u003e\n\u003cli\u003eTapered bung\u003c\/li\u003e\n\u003cli\u003eDyneema for running rigging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild accessories\n\u003cul\u003e\n\u003cli\u003e1 tube of HY4070 adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not include the silicone Bow Bumper, please order separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eComponents of the Hull Parts Only - Proteus EVO 1.2\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHull\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eHull printed in 6 sections in PLA Tough+ in the colour of your choice\u003c\/li\u003e\n\u003cli\u003eUser license for one Proteus boat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eExternal printed components in PLA Tough+ in the same color of the hull\n\u003cul\u003e\n\u003cli\u003eAeroDeck hatch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInternal printed components in PLA in the colour of your choice\n\u003cul\u003e\n\u003cli\u003ePot lid\u003c\/li\u003e\n\u003cli\u003ePot trunk rim\u003c\/li\u003e\n\u003cli\u003eServo tray sailwinch and rudder servo\u003c\/li\u003e\n\u003cli\u003eBattery housing\u003c\/li\u003e\n\u003cli\u003eMast ram\u003c\/li\u003e\n\u003cli\u003eFin box insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not include the silicone Bow Bumper, please order separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufactured under license from Craig Richards.\u003c\/p\u003e","brand":"SailorMadeRC","offers":[{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Orange","offer_id":57805029015887,"sku":"SM-PROTEUS12-KIT-ORG","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Yellow","offer_id":57805028983119,"sku":"SM-PROTEUS12-KIT-YLW","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Cyan","offer_id":57805029048655,"sku":"SM-PROTEUS12-KIT-CYN","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Gray","offer_id":57805029081423,"sku":"SM-PROTEUS12-KIT-GRY","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   White","offer_id":57805028950351,"sku":"SM-PROTEUS12-KIT-WHT","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Orange","offer_id":57805029179727,"sku":"SM-PROTEUS12-HULL-ORG","price":400.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Yellow","offer_id":57805029146959,"sku":"SM-PROTEUS12-HULL-YLW","price":400.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Cyan","offer_id":57805029212495,"sku":"SM-PROTEUS12-HULL-CYN","price":400.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Gray","offer_id":57805029245263,"sku":"SM-PROTEUS12-HULL-GRY","price":400.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   White","offer_id":57805029114191,"sku":"SM-PROTEUS12-HULL-WHT","price":400.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-PROTEUS12-ORG.MAIN.jpg?v=1783201668"},{"product_id":"iom-alioth-v4","title":"IOM - Alioth V4","description":"\u003cp\u003eBuild kits for an Alioth V4 IOM hull. Available in two options:\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFull Hull Build Kit\u003c\/strong\u003e includes all of the parts and adhesives necessary to build a complete hull, except the bow bumper which should be selected and ordered separately.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eHull Parts Only\u003c\/strong\u003e version includes all of the printed parts, but will require you to source all of the fittings and adhesives to complete the hull.\u003c\/p\u003e\n\u003cp\u003eFull build instructions will shortly be available.\u003c\/p\u003e\n\u003cp\u003eSelect the desired hull color from the listed options. Internal components and details can be printed in PLA of any color. Use the text box to customize as desired. Available colors can be viewed \u003ca href=\"\/blogs\/reference\/colors\" target=\"_blank\" title=\"Color References\" rel=\"noopener\"\u003ehere\u003c\/a\u003e. If no color is specified these parts will be printed in the same color as the hull.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eAbout the Alioth\u003c\/h4\u003e\n\u003cp\u003eThe Alioth is widely recognized as the first truly competitive IOM yacht specifically designed for 3D printing. Designed in Spain and first launched in 2020, the latest V4 version was launched in March 2025. With over 450 boats sailing in over 30 countries, the Alioth is a proven concept. A Spanish National Championship title (2025), European 9th place (2023) and multiple national, regional and world champtionship appearances clearly show the Alioth has proven that self-built boats are viable and can be highly competitive.\u003c\/p\u003e\n\u003cp\u003eAs a pioneer in hull designs for 3D printing, Juan Marcos Egea has created a fast and light hull that is printed in vase mode in a single wall. This unique printing characteristic with no joints gives the hull incredible strength, but limits the ability to incorporate internals into the print. This results in a build that requires more internal components to be assembled, making the Alioth a slightly more complex build than the Proteus, but equally achievable by novice builders.\u003c\/p\u003e\n\u003cp\u003eOur complete build kits and step by step guides make building a competitive boat achievable even to the novice builder. Total build time should be around one week with a few hours per night, or two full weekends. Check out our detailed build guide for more details. You will also find valuable information in the strong Facebook community of Alioth builders and owners.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eComponents of the Full Hull Build Kit - Alioth V4\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHull\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eHull printed in 5 sections in PLA Tough+ in the colour of your choice\u003c\/li\u003e\n\u003cli\u003eUser license for one Alioth boat\u003c\/li\u003e\n\u003cli\u003eAccess to the licensed user section of the Alioth designer website at rcsailinglab.com\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eExternal printed components in PLA in the colour of your choice\n\u003cul\u003e\n\u003cli\u003eMast ram support\u003c\/li\u003e\n\u003cli\u003eMast ram\u003c\/li\u003e\n\u003cli\u003eFin screw reinforcement\u003c\/li\u003e\n\u003cli\u003ePot lid\u003c\/li\u003e\n\u003cli\u003eAft hatch\u003c\/li\u003e\n\u003cli\u003eRigid aft cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInternal printed components in PLA in the colour of your choice\n\u003cul\u003e\n\u003cli\u003eJib strut\u003c\/li\u003e\n\u003cli\u003eMast box\u003c\/li\u003e\n\u003cli\u003e2 shroud reinforcements\u003c\/li\u003e\n\u003cli\u003eMainsail post tube\u003c\/li\u003e\n\u003cli\u003eRudder trunking deck support\u003c\/li\u003e\n\u003cli\u003eBackstay nut case\u003c\/li\u003e\n\u003cli\u003eM3.5 nut case\u003c\/li\u003e\n\u003cli\u003eFairlead support\u003c\/li\u003e\n\u003cli\u003ePot trunk\u003c\/li\u003e\n\u003cli\u003eRC hatch\u003c\/li\u003e\n\u003cli\u003eBattery housing\u003c\/li\u003e\n\u003cli\u003eRudder servo support for standard size servo\u003c\/li\u003e\n\u003cli\u003eRudder servo support for mini size servo\u003c\/li\u003e\n\u003cli\u003eSailwinch servo tray for RMG, Red Ant or S100-MG\u003c\/li\u003e\n\u003cli\u003eSailwinch servo tray for standard size servo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFittings\n\u003cul\u003e\n\u003cli\u003eRudder trunking\u003c\/li\u003e\n\u003cli\u003eRudder shaft 4 mm diameter\u003c\/li\u003e\n\u003cli\u003eMainsheet post (052)\u003c\/li\u003e\n\u003cli\u003eFairlead 6mm (052-006)\u003c\/li\u003e\n\u003cli\u003eThrough deck block - ball raced (065-SE)\u003c\/li\u003e\n\u003cli\u003e2 Fibreglass rods\u003c\/li\u003e\n\u003cli\u003eWheel nut M4 (026-WHEEL)\u003c\/li\u003e\n\u003cli\u003eCountersunk screw M4 x 40mm\u003c\/li\u003e\n\u003cli\u003e1.2mm stainless steel wire for sheet loops\u003c\/li\u003e\n\u003cli\u003e8 Eyebolts M3.5 x 25mm (040-025)\u003c\/li\u003e\n\u003cli\u003eEyebolt M3.5 x 8mm (040-008)\u003c\/li\u003e\n\u003cli\u003e11 M3.5 nuts\u003c\/li\u003e\n\u003cli\u003e16 M2.5 x 8mm screws\u003c\/li\u003e\n\u003cli\u003e16 M2.5 nuts\u003c\/li\u003e\n\u003cli\u003eRudder arm\u003c\/li\u003e\n\u003cli\u003eRudder link M3 x 150mm\u003c\/li\u003e\n\u003cli\u003e2 Rudder link ball joint terminals M3\u003c\/li\u003e\n\u003cli\u003eMast heel fitting\u003c\/li\u003e\n\u003cli\u003eTapered bung\u003c\/li\u003e\n\u003cli\u003eDyneema for running rigging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild accessories\n\u003cul\u003e\n\u003cli\u003e2 tubes of HY4070 adhesive\u003c\/li\u003e\n\u003cli\u003e1 tube cyanoacrylate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not include the silicone Bow Bumper, please order separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eComponents of the Hull Parts Only - Alioth V4\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHull\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eHull printed in 5 sections in PLA Tough+ in the colour of your choice\u003c\/li\u003e\n\u003cli\u003eUser license for one Alioth boat\u003c\/li\u003e\n\u003cli\u003eAccess to the licensed user section of the Alioth designer website at rcsailinglab.com\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eExternal printed components in PLA in the colour of your choice\n\u003cul\u003e\n\u003cli\u003eMast ram support\u003c\/li\u003e\n\u003cli\u003eMast ram\u003c\/li\u003e\n\u003cli\u003eFin screw reinforcement\u003c\/li\u003e\n\u003cli\u003ePot lid\u003c\/li\u003e\n\u003cli\u003eAft hatch\u003c\/li\u003e\n\u003cli\u003eRigid aft cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInternal printed components in PLA in the colour of your choice\n\u003cul\u003e\n\u003cli\u003eJib strut\u003c\/li\u003e\n\u003cli\u003eMast box\u003c\/li\u003e\n\u003cli\u003e2 shroud reinforcements\u003c\/li\u003e\n\u003cli\u003eMainsail post tube\u003c\/li\u003e\n\u003cli\u003eRudder trunking deck support\u003c\/li\u003e\n\u003cli\u003eBackstay nut case\u003c\/li\u003e\n\u003cli\u003eM3.5 nut case\u003c\/li\u003e\n\u003cli\u003eFairlead support\u003c\/li\u003e\n\u003cli\u003ePot trunk\u003c\/li\u003e\n\u003cli\u003eRC hatch\u003c\/li\u003e\n\u003cli\u003eBattery housing\u003c\/li\u003e\n\u003cli\u003eRudder servo support for standard size servo\u003c\/li\u003e\n\u003cli\u003eRudder servo support for mini size servo\u003c\/li\u003e\n\u003cli\u003eSailwinch servo tray for RMG, Red Ant or S100-MG\u003c\/li\u003e\n\u003cli\u003eSailwinch servo tray for standard size servo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not include the silicone Bow Bumper, please order separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufactured under license from RCSailingLab.\u003c\/p\u003e\n\u003cp\u003eWhen purchasing this product your authorize SailorMadeRC to submit your name, address and email to RCSailingLab to generate the user license and website access credentials.\u003c\/p\u003e","brand":"SailorMadeRC","offers":[{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Yellow","offer_id":57805029310799,"sku":"SM-ALIOTH4-KIT-YLW","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Orange","offer_id":57805029343567,"sku":"SM-ALIOTH4-KIT-ORG","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Cyan","offer_id":57805029376335,"sku":"SM-ALIOTH4-KIT-CYN","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Gray","offer_id":57805029409103,"sku":"SM-ALIOTH4-KIT-GRY","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   White","offer_id":57805029278031,"sku":"SM-ALIOTH4-KIT-WHT","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Yellow","offer_id":57805029474639,"sku":"SM-ALIOTH4-HULL-YLW","price":350.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Orange","offer_id":57805029507407,"sku":"SM-ALIOTH4-HULL-ORG","price":350.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Cyan","offer_id":57805029540175,"sku":"SM-ALIOTH4-HULL-CYN","price":350.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Gray","offer_id":57805029572943,"sku":"SM-ALIOTH4-HULL-GRY","price":350.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   White","offer_id":57805029441871,"sku":"SM-ALIOTH4-HULL-WHT","price":350.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-ALIOTH4-YLW.MAIN.jpg?v=1783201668"},{"product_id":"iom-proteus-v1-6","title":"IOM - Proteus EVO 1.6","description":"\u003cp\u003eBuild kits for a Proteus EVO 1.6 IOM hull. Available in two options:\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFull Hull Build Kit\u003c\/strong\u003e includes all of the parts and adhesives necessary to build a complete hull, except the bow bumper which should be selected and ordered separately.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eHull Parts Only\u003c\/strong\u003e version includes all of the printed parts, but will require you to source all of the fittings and adhesives to complete the hull.\u003c\/p\u003e\n\u003cp\u003eFull build instructions will shortly be available.\u003c\/p\u003e\n\u003cp\u003eSelect the desired hull color from the listed options. Internal components and details can be printed in PLA of any color. Use the text box to customize as desired. Available colors can be viewed \u003ca href=\"\/blogs\/reference\/colors\" title=\"Color References\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e. If no color is specified these parts will be printed in the same color as the hull.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eAbout the Proteus\u003c\/h4\u003e\n\u003cp\u003eThe Proteus is a recent development designed by Craig Richards in the UK. Launched in September 2025, the boat is rapidly evolving and is already in its third public version. The two latest versions are available as kits. While currently having a smaller fleet than the Alioth, the Proteus has demonstrated its modern lines are very competitive, both in national and international events.\u003c\/p\u003e\n\u003cp\u003eThe EVO 1.2 is an evolution of the original hull. With very slight changes to the hull design from the original boat, the EVO 1.2 brought the innovative AeroDeck which completely hides the hatch for a very clean deck. After sailing the UK nationals and placing 6th with version 1.2, Craig wanted to improve the hull, particularly for the conditions in Datchet with stronger winds and choppy waves.\u003c\/p\u003e\n\u003cp\u003eEVO 1.6 is the latest hull design, with which Craig raced the world championship in Datchet and placed 10th among 84 of the best skippers in the world. It has a standard pot lid hatch but uses a magnetic jib attachment and a new path for sailwinch lines that leads to a clean deck. In Craig's own words:\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\"The Proteus project was to try and get a 3D printed boat good enough to have a chance at the worlds. As I sailed each regatta I would come home with ideas to improve the existing boat ... so the boat evolved, hence the EVO. All the releases were good. 1.2 is very fast in most of the smaller venues we sail in, but where there is a longer fetch and we get short steep waves it can be hard to hold onto the Venti and Britpop. 1.3 To 1.5 were not improvements and were not released. 1.6 seems good all round and I think is faster downwind in waves. All the boats are so close in performance I dont think we are going to see a boat that has a hull that is noticeably faster. So, 1.6 may be faster across a broad range of Datchet conditions, but on flatter smaller waters 1.2 will more than hold its own.\"\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe Proteus concept, in line with the Alioth, seeks to make competitive IOM boats accessible to the home builder at a fraction of the cost (and time) of fibreglass yachts. Using standard 3D printing techniques (instead of the advanced vase mode used by the Alioth) allows the Proteus to incorporate much of the internal components in the hull printing process. This leads to an easier build, with fewer components and simpler steps.\u003c\/p\u003e\n\u003cp\u003eOur complete build kits and step-by-step guides make building a competitive boat achievable even to the novice builder. Total build time should be around one week with a few hours per night, or two full weekends. Check out our detailed build guide for more details. You will also find valuable information and support in the strong Facebook community of Proteus builders and owners.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eComponents of the Full Hull Build Kit - Proteus EVO 1.6\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHull\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eHull printed in 6 sections in PLA Tough+ in the colour of your choice\u003c\/li\u003e\n\u003cli\u003eUser license for one Proteus boat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eExternal components\n\u003cul\u003e\n\u003cli\u003eMast ram (printed in the same material and colour as the hull)\u003c\/li\u003e\n\u003cli\u003ePot Rim (printed in the same material and colour as the hull)\u003c\/li\u003e\n\u003cli\u003ePot Lid (commercially sourced - not printed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInternal printed components in PLA in the colour of your choice\n\u003cul\u003e\n\u003cli\u003eServo tray sailwinch and rudder servo\u003c\/li\u003e\n\u003cli\u003eBattery housing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFin box insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFittings\n\u003cul\u003e\n\u003cli\u003eRudder shaft 4 mm diameter\u003c\/li\u003e\n\u003cli\u003e3 Blocks - ball raced\u003c\/li\u003e\n\u003cli\u003eRod for magnetig jib - 2.5mm x 90 mm\u003c\/li\u003e\n\u003cli\u003eWheel nut M4\u003c\/li\u003e\n\u003cli\u003eCountersunk screw M4 x 40mm\u003c\/li\u003e\n\u003cli\u003e1.2mm stainless steel wire for sheet loops\u003c\/li\u003e\n\u003cli\u003e8 Eyebolts M3.5 x 25mm (040-025)\u003c\/li\u003e\n\u003cli\u003e4 M3.5 nuts\u003c\/li\u003e\n\u003cli\u003ePTFE tube 10 cm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRudder arm\u003c\/li\u003e\n\u003cli\u003eRudder link M3 x 300mm\u003c\/li\u003e\n\u003cli\u003e2 Rudder link ball joint terminals M3\u003c\/li\u003e\n\u003cli\u003eMast heel fitting\u003c\/li\u003e\n\u003cli\u003eTapered bung\u003c\/li\u003e\n\u003cli\u003eDyneema for running rigging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild accessories\n\u003cul\u003e\n\u003cli\u003e1 tube of HY4070 adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not include the silicone Bow Bumper, please order separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eComponents of the Hull Parts Only - Proteus EVO 1.6\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHull\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eHull printed in 6 sections in PLA Tough+ in the colour of your choice\u003c\/li\u003e\n\u003cli\u003eUser license for one Proteus boat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eExternal components\n\u003cul\u003e\n\u003cli\u003eMast ram (printed in the same material and colour as the hull)\u003c\/li\u003e\n\u003cli\u003ePot Rim (printed in the same material and colour as the hull)\u003c\/li\u003e\n\u003cli\u003ePot Lid (commercially sourced - not printed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInternal printed components in PLA in the colour of your choice\n\u003cul\u003e\n\u003cli\u003eServo tray sailwinch and rudder servo\u003c\/li\u003e\n\u003cli\u003eBattery housing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFin box insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not include the silicone Bow Bumper, please order separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufactured under license from Craig Richards.\u003c\/p\u003e","brand":"SailorMadeRC","offers":[{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Cyan","offer_id":57805029704015,"sku":"SM-PROTEUS16-KIT-CYN","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Yellow","offer_id":57805029638479,"sku":"SM-PROTEUS16-KIT-YLW","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Orange","offer_id":57805029671247,"sku":"SM-PROTEUS16-KIT-ORG","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   Gray","offer_id":57805029736783,"sku":"SM-PROTEUS16-KIT-GRY","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Full hull build kit \/ Bambu Lab PLA Tough+   White","offer_id":57805029605711,"sku":"SM-PROTEUS16-KIT-WHT","price":500.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Cyan","offer_id":57805029867855,"sku":"SM-PROTEUS16-HULL-CYN","price":400.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Yellow","offer_id":57805029802319,"sku":"SM-PROTEUS16-HULL-YLW","price":400.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Orange","offer_id":57805029835087,"sku":"SM-PROTEUS16-HULL-ORG","price":400.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   Gray","offer_id":57805029900623,"sku":"SM-PROTEUS16-HULL-GRY","price":400.0,"currency_code":"EUR","in_stock":true},{"title":"Hull parts only \/ Bambu Lab PLA Tough+   White","offer_id":57805029769551,"sku":"SM-PROTEUS16-HULL-WHT","price":400.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-PROTEUS16-CYN.MAIN.jpg?v=1783201667"},{"product_id":"bow-bumper","title":"Bow Bumper","description":"\u003cp\u003eBow bumpers made to custom fit our available hull kits. Elaborated in 2 part silicone and coloured with mica power to bring a slight sparkle of detail to your boat design. Available in 15 colours to match your style.\u003c\/p\u003e\n\u003cp\u003eSelect the appropriate hull model. Attach to the hull using silicone or silicone glue. Other adhesives will not adhere to silicone.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 2 part silicone coloured with mica powder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: Alioth 16g, Proteus 11g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SailorMadeRC","offers":[{"title":"Alioth V4 \/ Black","offer_id":57805029966159,"sku":"SM-BOW-ALIOTH4-BLK","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Silver","offer_id":57805029998927,"sku":"SM-BOW-ALIOTH4-SLV","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Bronze","offer_id":57805030031695,"sku":"SM-BOW-ALIOTH4-BRZ","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Olive Green","offer_id":57805030064463,"sku":"SM-BOW-ALIOTH4-OLV","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Green Gold","offer_id":57805030097231,"sku":"SM-BOW-ALIOTH4-GGL","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Teal","offer_id":57805030129999,"sku":"SM-BOW-ALIOTH4-TEA","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Cyan","offer_id":57805030162767,"sku":"SM-BOW-ALIOTH4-CYN","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Blue","offer_id":57805030195535,"sku":"SM-BOW-ALIOTH4-BLU","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Purple","offer_id":57805030228303,"sku":"SM-BOW-ALIOTH4-PUR","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Magenta","offer_id":57805030261071,"sku":"SM-BOW-ALIOTH4-MGT","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Red","offer_id":57805030293839,"sku":"SM-BOW-ALIOTH4-RED","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Orange","offer_id":57805030326607,"sku":"SM-BOW-ALIOTH4-ORG","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Yellow","offer_id":57805030359375,"sku":"SM-BOW-ALIOTH4-YLW","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Gold","offer_id":57805030392143,"sku":"SM-BOW-ALIOTH4-GLD","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Alioth V4 \/ Pearl White","offer_id":57805030424911,"sku":"SM-BOW-ALIOTH4-PRL","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Black","offer_id":57805030457679,"sku":"SM-BOW-PROTEUS12-BLK","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Silver","offer_id":57805030490447,"sku":"SM-BOW-PROTEUS12-SLV","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Bronze","offer_id":57805030523215,"sku":"SM-BOW-PROTEUS12-BRZ","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Olive Green","offer_id":57805030555983,"sku":"SM-BOW-PROTEUS12-OLV","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Green Gold","offer_id":57805030588751,"sku":"SM-BOW-PROTEUS12-GGL","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Teal","offer_id":57805030621519,"sku":"SM-BOW-PROTEUS12-TEA","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Cyan","offer_id":57805030654287,"sku":"SM-BOW-PROTEUS12-CYN","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Blue","offer_id":57805030687055,"sku":"SM-BOW-PROTEUS12-BLU","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Purple","offer_id":57805030719823,"sku":"SM-BOW-PROTEUS12-PUR","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Magenta","offer_id":57805030752591,"sku":"SM-BOW-PROTEUS12-MGT","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Red","offer_id":57805030785359,"sku":"SM-BOW-PROTEUS12-RED","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Orange","offer_id":57805030818127,"sku":"SM-BOW-PROTEUS12-ORG","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Yellow","offer_id":57805030850895,"sku":"SM-BOW-PROTEUS12-YLW","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Gold","offer_id":57805030883663,"sku":"SM-BOW-PROTEUS12-GLD","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.2 \/ Pearl White","offer_id":57805030916431,"sku":"SM-BOW-PROTEUS12-PRL","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Black","offer_id":57805030949199,"sku":"SM-BOW-PROTEUS16-BLK","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Silver","offer_id":57805030981967,"sku":"SM-BOW-PROTEUS16-SLV","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Bronze","offer_id":57805031014735,"sku":"SM-BOW-PROTEUS16-BRZ","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Olive Green","offer_id":57805031047503,"sku":"SM-BOW-PROTEUS16-OLV","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Green Gold","offer_id":57805031080271,"sku":"SM-BOW-PROTEUS16-GGL","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Teal","offer_id":57805031113039,"sku":"SM-BOW-PROTEUS16-TEA","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Cyan","offer_id":57805031145807,"sku":"SM-BOW-PROTEUS16-CYN","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Blue","offer_id":57805031178575,"sku":"SM-BOW-PROTEUS16-BLU","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Purple","offer_id":57805031211343,"sku":"SM-BOW-PROTEUS16-PUR","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Magenta","offer_id":57805031244111,"sku":"SM-BOW-PROTEUS16-MGT","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Red","offer_id":57805031276879,"sku":"SM-BOW-PROTEUS16-RED","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Orange","offer_id":57805031309647,"sku":"SM-BOW-PROTEUS16-ORG","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Yellow","offer_id":57805031342415,"sku":"SM-BOW-PROTEUS16-YLW","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Gold","offer_id":57805031375183,"sku":"SM-BOW-PROTEUS16-GLD","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"Proteus EVO 1.6 \/ Pearl White","offer_id":57805031407951,"sku":"SM-BOW-PROTEUS16-PRL","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/3010\/7727\/files\/SM-BOW.MAIN.jpg?v=1780263144"}],"url":"https:\/\/sailormaderc.com\/collections\/frontpage.oembed","provider":"SailorMadeRC","version":"1.0","type":"link"}